Descriptión
Hydraulic wheelie bin tipper with a 700 mm tipping height
The SIMPRO Dumpmaster DM0700 is a mobile bin lifter and tipper for controlled emptying into a suitable receiving container or hopper. This model is the low-tipping-height option in the Dumpmaster range, useful when the receiving edge is lower than the heights served by larger models.
Select the bin lift around the receiving container
The 700 mm figure describes the tipping height, not the overall machine height or the height of every compatible bin. Before selecting a waste-bin lifting device, measure the receiving edge, clearance above the machine and the area needed to open the guard door. Check that the discharge path reaches the receiving opening without interference.
DM0700 European catalogue configuration
- Maximum loaded-bin mass: 250 kg, including the bin and its contents.
- Tipping height: 700 mm.
- EN840 wheelie-bin cradle for 80, 120, 140 and 240 litre bins.
- Reference footprint: 1,175 × 965 mm; approximate height: 1,760 mm.
- Approximate machine weight: 160 kg.
- Power options listed: 24 V / 20 Ah GEL battery or approximately 415 V three-phase mains.
- Hot-dip galvanised frame and cradle; full guarding and door interlock.
The European catalogue lists IP56 and CAT1/PLc for its reference configuration. Confirm the protection rating, powerpack, cradle and safety equipment of the supplied unit; other Dumpmaster configurations and regional specifications must not be assumed identical.
Compare tipping height, not just lifting capacity
For a higher receiving edge, compare the SIMPRO Dumpmaster DM1500 hydraulic bin lifter. Its tipping height is one and a half metres. Select between these models by discharge geometry rather than by assuming that a larger model number means a larger lifting capacity.
Send Makitor the bin dimensions, loaded weight, receiving-container measurements and delivery location. Price and availability are on request. The quotation will identify the selected DM0700 power supply, cradle, included equipment and transport arrangements.