Descriptión
Mobile hydraulic bin lifter for a 1,500 mm tipping height
The SIMPRO Dumpmaster DM1500 lifts and tips compatible wheelie bins into a suitable receiving container. This hydraulic bin tipper can be assessed for waste handling and other material-transfer tasks where the receiving edge requires a 1.5 m tipping height.
Match the cradle and discharge height to your workflow
A bin-emptying machine must fit both the bin being lifted and the receptacle receiving its contents. Measure the receiving opening and check the lid, edge and surrounding equipment for clearance. For a food-processing application, specify the material and hygiene requirements so the appropriate construction and cradle can be quoted; the standard galvanised version must not be assumed to be a stainless-steel food-contact configuration.
Reference specifications for the DM1500
- Maximum combined mass of bin and contents: 250 kg.
- Tipping height: 1,500 mm.
- EN840 cradle configuration: 80, 120, 140 and 240 litre wheelie bins.
- European catalogue dimensions: 1,175 × 965 mm footprint and approximately 2,560 mm overall height.
- Approximate machine weight in that catalogue: 210 kg.
- Power options: 24 V / 20 Ah GEL battery or approximately 415 V three-phase mains.
- Hot-dip galvanised frame and cradle, full guarding and door interlock.
The European reference lists IP56 and CAT1/PLc, with higher safety configurations available as options. Confirm the ratings and dimensions for the actual supply, as regional Dumpmaster specifications differ. The quoted 250 kg capacity is not 250 kg of contents plus an additional bin.
Choosing between Dumpmaster lifting heights
For a lower receiving edge, compare the Dumpmaster DM0700 bin tipper with a 700 mm tipping height. Both references use a nominal maximum loaded-bin mass of 250 kg; the required discharge geometry determines which is appropriate.
Ask Makitor for a DM1500 quotation with the cradle, powerpack, installation requirements and delivery destination specified. Price, availability and transport are confirmed on request for the configuration to be supplied.